Adhesive is used to glue thermal insulation (mineral, glass wool, foam, vermiculite, foam glass, expanded polystyrene, polyurethane foam) with steel, galvanized, aluminum, and concrete surfaces; also: oriented-chipboard, wood-chipboard, etc. In addition to that, Himtrust PU Adhesive for sandwich panels (1K) can be applied in the production of sandwich panels using thermal insulation materials in the periodic press.
Cube-1000kg
Barrel - 200 kg.
Appearance: brown uniform viscous liquid.
| Parameter | Value |
|---|---|
| Density at 20ºC | 1.10 -1.15 g/cm3 |
| Dynamic viscosity at 25°C | 2500-5500 MPa * s |
| Strength of the adhesive joint shifting (GOST 14759) | 6 MPa |
| Adhesive joint operating temperature | From - 45 °С up to +100 °С |
All dust and other debris must be cleaned off the surface; oil stains must be removed with organic solvents (acetone, toluene, etc.) before product application.
Follow the Occupational Safety in Construction (SNiP III-4-80) regulations. Use personal protective gear: a gas mask or protective mask, special clothing covering all areas of the body, gloves, and shoes.
Storage time of the unpacked product is 6 months at a temperature not lower than + 10° C and not higher than +30 ° C (should be kept in a dry place)
Problem: The boding quality of thermal insulation material to the surface is low due to incompliance with the recommended bonding technology.
Solution: Remove dried glue from the surface with a scraper, spatula, or knife. Re-apply the glue, spray water, and align the surfaces for re -gluing. Put the structure under the press, follow the recommendations regarding the time, temperature, and pressure strength of the press.
Problem: Bubbles are caused due to insufficient pressing time and pressure.
Solution: Remove dried glue from the surface with a scraper, spatula, or knife. Re-apply the glue, spray water, and align the surfaces to be bonded. Put the structure under the press, follow the time, temperature, and pressure strength of the press recommendations.
Production of polyurethane materials and foamed polymeric materials is protected by patents and patent applications. This publication does not grant the right to carry out patented technological processes. The information and recommendations contained in this publication fully reflect Himtrust’s knowledge of the product to the date. All the information is accurate to the best of our knowledge at the time of the publication. Nothing in this publication should be construed as a warranty. In all circumstances, it is the user’s responsibility to determine the applicability of such information or the product itself to the user's specific purpose.
For high-strength elastic products based on rubber crumb using hot press.
For high-strength elastic products based on rubber crumb using cold press.
For gluing heat-insulating filler in the production of sandwich-panels.
For rubber crumb used in creating anti-slip coating.
