Himtrust SKZ-30 (delayed start)

For thermal and acoustic insulation of interwall spaces with actual density 40-45 kg/m3 with delayed system time parameters.


Component A: Himtrust KAZ-30 (delayed start) (container: 220 kg, 50* kg).

Component B: (tare: 250 kg, 50* kg).

* price for small containers + 10 rubles/kg.


Start time: 35-45 sec
Foam density: 38-43 kg/m3
Density (in the core): 40-45 kg/m3

Product Description

Polyol (component A) is a transparent liquid of yellow to brown color.

Isocyanate component (component B) — polymeric diphenylmethane diisocyanate of such grades as «Lupranat M 20 S», «Millionate — MR 200», «Wannate — PM 200», «Desmodur VKS 20 F», «Suprasec 5005», «Cosmonate M-200», «Ongronate 2100» — brown transparent liquid without separating.

Physical and mechanical parameters

Parameter Value
Start time 35-45 sec
Rising time 150-180 sec
Apparent density at free foaming 38-43 kg/m3
Density (in the core) 40-45 kg/m3
Thermal conductivity 0,023 W/(m*°C)
Compressive strength 0,18 N/mm2
Bending strength 0,3 N/mm2
Closed cell content 92%
Vapor permeability coefficient 0,05 Mg/(m*h*Pa)
Water absorption after 7 days not more than 5%

Processing rules

For high pressure machines:

  1. Ambient temperature 15-20 ° C. Flow heater temperature: component A 40-45°C, component B 45-55°C, hose temperature 35-45°C.
  2. Ambient temperature is 20-30°C. Temp. of flow-through heaters: component A 35-40°C, component B 40-45°C, temperature of hoses 30-35°C.
  3. Ambient temperature 30-40°C. Flow heater temperature: component A 30-35°C, component B 40-45°C, turn off the hose heating.

For low pressure machines:

  1. Ambient temperature 15-20 ° C. Barrel with component A heated to 40-45 ° C, with component B to 50-55 ° C. Hoses are not longer than 10 m and must be insulated.
  2. The ambient temperature is 20-40 ° C. The temperature of the component A is 30-40 ° C, component B is 40-50 ° C.

PU foam

  1. Pouring polyurethane foam in a closed space between the walls is done through special holes 12-14 mm in diameter, drilled in the outer or inner wall of the house.
  2. Filling holes are evenly distributed over the entire area of the wall in a staggered pattern with spacing of 50-100 cm from each other.
  3. First pour the foam through the holes located at the bottom level, then gradually proceed to the filling of the upper levels and so on to the top. The filling of the cavity is controlled by squeezing the foam out of the filling holes.

Health effects and precautions

Flammable liquid. Contains flammable compounds, keep away from sources of fire, sparks, do not smoke nearby. In case of contact with skin — causes irritation. In case of contact with eyes — causes irreversible consequences. May contaminate objects in the environment.

When working with the system use insulating gas mask, gas mask BKF or B, goggles with side shields, impermeable gloves made of synthetic rubber, special clothes and shoes. Premises where work is carried out must be equipped with exhaust ventilation, workplaces — local suction and fire extinguishing means.

Storage recommendations

Store in a ventilated warehouse or under a roof at temperatures from −60 ° C to +30 ° C, away from heaters, fire sources and oxidizing agents.

Shelf life — 12 months from the date of production.

Other products

Himtrust SKN-10 G3

Component A: Himtrust KAN-10 G3 (tare: 220 kg, 50 kg). Component B: (container: 250 kg, 50 kg)

Foaming Agent: Water
Foaming density: 10-15
The output of foam per set: 12-16

Himtrust SKN-20 G3

Rigid polyurethane foam spraying with density of 20 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 18-22
The output of foam per set: 16-18
Consumption per 1m2 at 50 mm thickness: 1,1-1,35

Himtrust SKN-30 G2

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G2 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 30-35
The output of foam per set: 12-13
Consumption per 1m2 at 50 mm thickness: 2,0-2,25

Himtrust SKN-30 G3

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 30-35
The output of foam per set: 12-13
Consumption per 1m2 at 50 mm thickness: 1,8-2,5

Himtrust SKN-30 G4

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G4 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 30-35
The output of foam per set: 12-13
Consumption per 1m2 at 50 mm thickness: 1,8-2,5

Himtrust SKN 30/141 G3

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 25-30
The output of foam per set: 12-14
Consumption per 1m2 at 50 mm thickness: 1,75-2,25

Himtrust SKN-30/141 G3 (Premium)

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 30-35
The output of foam per set: 12-14
Consumption per 1m2 at 50 mm thickness: 1,8-2,25

Himtrust SKN-30/141 G3 (winter up to -15)

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 30-35
The output of foam per set: 12-14
Consumption per 1m2 at 50 mm thickness: 1,8-2,25

Himtrust SKN-30/141 G3 (winter)

Rigid polyurethane foam spraying with density of 30 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 30-35
The output of foam per set: 12-14
Consumption per 1m2 at 50 mm thickness: 1,8-2,25

Himtrust SKZ-20

Component A - KAZ-20, component B: Wannate PM-200 etc.

Start time, (sec): 10-20
Ratio A:B: 100:100
Foaming density: 18-22

Himtrust SKN-40 G1

Rigid polyurethane foam spraying with density of 40 kg/m3 and combustibility class G1 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 38-43
The output of foam per set: 9-10
Consumption per 1m2 at 50 mm thickness: 2,5-2,75

Himtrust SKN-40 G2

Rigid polyurethane foam spraying with density of 40 kg/m3 and combustibility class G2 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 38-43
The output of foam per set: 9-10
Consumption per 1m2 at 50 mm thickness: 2-2,25

Himtrust SKN-40 G3

Rigid polyurethane foam spraying with density of 40 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 38-43
The output of foam per set: 9-10
Consumption per 1m2 at 50 mm thickness: 2,25-2,5

Himtrust SKN-40/141 G3

Rigid polyurethane foam spraying with density of 40 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 38-42
The output of foam per set: 9-10
Consumption per 1m2 at 50 mm thickness: 2,25-2,5

Himtrust SKN-40/141 G3(winter)

Rigid polyurethane foam spraying with density of 40 kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 38-43
The output of foam per set: 9-10
Consumption per 1m2 at 50 mm thickness: 2,25-2,5

Himtrust SKN-60 G1

Rigid polyurethane foam spraying with density of 60kg/m3 and combustibility class G1 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 50-60
Consumption per 1m2 at 50 mm thickness: 3,0-3,5

Himtrust SKN-60 G2

Rigid polyurethane foam spraying with density of 60kg/m3 and combustibility class G2 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 50-60
Consumption per 1m2 at 50 mm thickness: 3,0-3,5

Himtrust SKN-60 G3

Rigid polyurethane foam spraying with density of 60kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 50-60
Consumption per 1m2 at 50 mm thickness: 3,0-3,5

Himtrust SKN-60/141 G3

Rigid polyurethane foam spraying with density of 60kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Freon
Foaming density: 50-60
The output of foam per set: 7-8
Consumption per 1m2 at 50 mm thickness: 3,0-3,5

Himtrust SKN-100 G3

Rigid polyurethane foam spraying with density of 100kg/m3 and combustibility class G3 for seamless thermal insulation.

Foaming Agent: Water
Foaming density: 90-100
Consumption per 1m2 at 50 mm thickness: 5,0-5,5