Release agent to prevent polyurethane foam from adhering to molds: thermal insulation shells, panels, integral skin polyurethane foams, and decorative products.
Packaging: Canister: 2 kg, 3 kg, 5 kg, and 10 kg.
Non-volatile matter content not less than 5%.
The release agent leaves no greasy residue or streaks on molded products.
Coverage per single coat 25–65 g/m2.
Himtrust AC-5 is an anti-adhesion composition made of wax compositions in organic solvents. It appears as a white dispersion.
| Parameter | Value |
| Appearance | White dispersion |
| Mass fraction of non-volatile substances at 125°C for 1 hour, %, not less than | 5 |
| Dynamic viscosity at 40°C, mPa·s, not more than | 100 |
| Density, kg/m3 | 650-750 |
The anti-adhesion lubricant Himtrust AC-5 causes irritation, dryness, and peeling when it comes into contact with the skin. It causes irritation, redness, and tearing when it comes into contact with the eyes. Inhalation irritates the mucous membranes of the upper respiratory tract.
Before starting work:
Himtrust AC-5 lubricant is a highly flammable combustible liquid. There should be no sources of fire or sparks in the work area. The room must be equipped with exhaust ventilation and fire extinguishing equipment. Use personal protective equipment: special clothing, gloves, footwear, protective glasses.
If Himtrust AC-5 lubricant comes into contact with open skin areas, it should be removed with a rag and washed off with warm water and soap. In case of skin reactions, seek medical attention. If it gets into the eyes, immediately rinse them with plenty of running water for 5–10 minutes, then seek medical attention.
| № | Problem | Solutions |
| 1 | Adhesion of polyurethane foam to the mold. | Clean the mold, reapply Himtrust AC-5 lubricant. |
PU system components are transported by all types of transport in enclosed vehicles, in accordance with the rules of cargo transportation applicable to each type of transport, ensuring the integrity of the packaging and its secure fixation to prevent damage and leaks.
Store components in covered warehouse premises in closed original packaging in conditions that exclude moisture.
Storage temperature: from −60°C to +30°C.
Shelf life under recommended conditions: 12 months.
When stored, the viscosity of the lubricant increases. It is permissible to dilute the lubricant with nefras solvent, no more than 5% of the remaining volume.
After the expiry of the storage period, the anti-adhesion lubricant should be checked for compliance with technical characteristics and, if found suitable, can also be used for its intended purpose.
Component A - KAT-40, component B: Wannate PM-200 etc.
Component A - KAT-40(slower), component B: Wannate PM-200 etc.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 10%.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 15%.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 45%.
For anti-adhesive coating in molds. Mass fraction of non-volatile substances not less than 60%.
Two-component system for the production of the "shell" of polyurethane foam with a density of the finished product 60 kg/m3 and above.
Component A - KAT-90 PPM, component B: Wannate PM-200 etc.
Two-component system for the SIP manufacture and sandwich panels of polyurethane foam with a density of the finished product not less than 55 kg/m3.
System for the PU foam structural elements production with a density of 80-120 kg/m3 in the finished product.
System for the PU foam structural elements production with a density of 200-300 kg/m3 in the finished product.
System for the polyurethane foam structural elements production with a density of 300-400 kg/m3 in the finished product.
System for the polyurethane foam structural elements production with a density of 400-600 kg/m3 in the finished product.
Non- foaming system designed to obtain fast – drying monolithic polyurethane.
