Production of installation graters, bee hives, decorative and structural elements of furniture, headboards for beds, cornices, ceiling sockets, linings, mascarons, etc.
Component A: Himtrust KAD-50 (container: 200 kg, 50 kg.)
Component B: (container: 250 kg, 50 kg.)
Polyol (component A) is a transparent liquid from yellow to brown colors.
Isocyanate component (component B) - polymer diphenylmethanediisocyanate brands: "Lupranat M 20 S", "Millionate-MR 200", "Wannate-PM 200", "Desmodur VKS 20 F", "Suprasec 5005", "Cosmonate M-200", "Ongronate 2100" - transparent non-delaminating brown liquid.
| Parameter | Value |
|---|---|
| Start time | 20-80 seconds |
| Rise time(time for gelatinization) | 55 -170 seconds |
| Apparent density during the free foaming | 50-65 kg/m3 |
| Product density | 80-120 kg/m3 |
| Surface hardness | 20-25 Shore D |
| Tensile strength | 30-40 kg / cm2 |
| Elongation at break | 7-8% |
| Compressive strength | 0.5-0.8 N/ mm2 |
Processing is carried out on high-and low-pressure filling machines, as well as by manual filling.
When working with the system, use an insulating gas mask, a BKF or B gas mask, safety glasses with side pads, impermeable synthetic rubber gloves, clothing and shoes. The space where the work is carried out must be equipped with exhaust ventilation, workplaces – local suction and fire extinguishing means.
The warranty period is 12 months at a temperature of 20°C without opening the barrels.
Parts of a hive manufactured on the SKD-50 system. Read the article: Polyurethane Hives: Advantages and Disadvantages
Production of polyurethane materials and foamed polymeric materials is protected by patents and patent applications. This publication does not grant the right to carry out patented technological processes. The information and recommendations contained in this publication fully reflect Himtrust’s knowledge of the product to date. All the information is accurate to the best of our knowledge at the time of the publication. Nothing in this publication should be construed as a warranty. In all circumstances, it is the user’s responsibility to determine the applicability of such information or the product itself to the user's specific purpose
Component A - KAT-40, component B: Wannate PM-200 etc.
Component A - KAT-40(slower), component B: Wannate PM-200 etc.
Component A - KAT-40F, component B: Wannate PM-200 etc.
For anti-adhesion coating in molds. Mass fraction of non-volatile substances not less than 5%.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 10%.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 15%.
For production of "pipe in a pipe", "pipe in a form", the pre-insulated pipes products.
For anti-adhesive coating in molds. The mass fraction of non-volatile substances is not less than 45%.
For anti-adhesive coating in molds. Mass fraction of non-volatile substances not less than 60%.
Two-component system for the production of the "shell" of polyurethane foam with a density of the finished product 60 kg/m3 and above.
Component A - KAT-90 PPM, component B: Wannate PM-200 etc.
Two-component system for the SIP manufacture and sandwich panels of polyurethane foam with a density of the finished product not less than 55 kg/m3.
System for the PU foam structural elements production with a density of 200-300 kg/m3 in the finished product.
System for the polyurethane foam structural elements production with a density of 300-400 kg/m3 in the finished product.
System for the polyurethane foam structural elements production with a density of 400-600 kg/m3 in the finished product.
Non- foaming system designed to obtain fast – drying monolithic polyurethane.
